init xyzaa

remove some xyzca specific configs and some xyzaa specific configs

1 files changed, 0 insertions, 371 deletions

diff --git a/etc/opendmarc/opendmarc.conf b/etc/opendmarc/opendmarc.conf
deleted file mode 100644
index f8d8120c..00000000
--- a/etc/opendmarc/opendmarc.conf
+++ /dev/null
@@ -1,371 +0,0 @@
-## opendmarc.conf -- configuration file for OpenDMARC filter
-##
-## Copyright (c) 2012-2015, The Trusted Domain Project.  All rights reserved.
-
-## DEPRECATED CONFIGURATION OPTIONS
-## 
-## The following configuration options are no longer valid.  They should be
-## removed from your existing configuration file to prevent potential issues.
-## Failure to do so may result in opendmarc being unable to start.
-## 
-## Renamed in 1.3.0:
-##   ForensicReports became FailureReports
-##   ForensicReportsBcc became FailureReportsBcc
-##   ForensicReportsOnNone became FailureReportsOnNone
-##   ForensicReportsSentBy became FailureReportsSentBy
-
-## CONFIGURATION OPTIONS
-
-##  AuthservID (string)
-##  	defaults to MTA name
-##
-##  Sets the "authserv-id" to use when generating the Authentication-Results:
-##  header field after verifying a message.  If the string "HOSTNAME" is
-##  provided, the name of the host running the filter (as returned by the
-##  gethostname(3) function) will be used.  
-#
-# AuthservID name
-AuthservID HOSTNAME
-
-##  AuthservIDWithJobID { true | false }
-##  	default "false"
-##
-##  If "true", requests that the authserv-id portion of the added
-##  Authentication-Results header fields contain the job ID of the message
-##  being evaluated.
-#
-# AuthservIDWithJobID false
-
-##  AutoRestart { true | false }
-##  	default "false"
-##
-##  Automatically re-start on failures. Use with caution; if the filter fails
-##  instantly after it starts, this can cause a tight fork(2) loop.
-#
-# AutoRestart false
-
-##  AutoRestartCount n
-##  	default 0
-##
-##  Sets the maximum automatic restart count.  After this number of automatic
-##  restarts, the filter will give up and terminate.  A value of 0 implies no
-##  limit.
-#
-# AutoRestartCount 0
-
-##  AutoRestartRate n/t[u]
-##  	default (no limit)
-##
-##  Sets the maximum automatic restart rate.  If the filter begins restarting
-##  faster than the rate defined here, it will give up and terminate.  This
-##  is a string of the form n/t[u] where n is an integer limiting the count
-##  of restarts in the given interval and t[u] defines the time interval
-##  through which the rate is calculated; t is an integer and u defines the
-##  units thus represented ("s" or "S" for seconds, the default; "m" or "M"
-##  for minutes; "h" or "H" for hours; "d" or "D" for days). For example, a
-##  value of "10/1h" limits the restarts to 10 in one hour. There is no
-##  default, meaning restart rate is not limited.
-#
-# AutoRestartRate n/t[u]
-
-##  Background { true | false }
-##  	default "true"
-##
-##  Causes opendmarc to fork and exits immediately, leaving the service
-##  running in the background.
-#
-# Background true
-
-##  BaseDirectory (string)
-##  	default (none)
-##
-##  If set, instructs the filter to change to the specified directory using
-##  chdir(2) before doing anything else.  This means any files referenced
-##  elsewhere in the configuration file can be specified relative to this
-##  directory.  It's also useful for arranging that any crash dumps will be
-##  saved to a specific location.
-#
-# BaseDirectory /var/run/opendmarc
-
-##  ChangeRootDirectory (string)
-##  	default (none)
-##
-##  Requests that the operating system change the effective root directory of
-##  the process to the one specified here prior to beginning execution.
-##  chroot(2) requires superuser access.  A warning will be generated if
-##  UserID is not also set.
-# 
-# ChangeRootDirectory /var/chroot/opendmarc
-
-##  CopyFailuresTo (string)
-##  	default (none)
-##
-##  Requests addition of the specified email address to the envelope of
-##  any message that fails the DMARC evaluation.
-#
-# CopyFailuresTo postmaster@localhost
-
-##  DNSTimeout (integer)
-##  	default 5
-## 
-##  Sets the DNS timeout in seconds.  A value of 0 causes an infinite wait.
-##  (NOT YET IMPLEMENTED)
-#
-# DNSTimeout 5
-
-##  EnableCoredumps { true | false }
-##  	default "false"
-##
-##  On systems that have such support, make an explicit request to the kernel
-##  to dump cores when the filter crashes for some reason.  Some modern UNIX
-##  systems suppress core dumps during crashes for security reasons if the
-##  user ID has changed during the lifetime of the process.  Currently only
-##  supported on Linux.
-#
-# EnableCoreDumps false
-
-##  FailureReports { true | false }
-##  	default "false"
-##
-##  Enables generation of failure reports when the DMARC test fails and the
-##  purported sender of the message has requested such reports.  Reports are
-##  formatted per RFC6591.
-# 
-# FailureReports false
-
-##  FailureReportsBcc (string)
-##  	default (none)
-##
-##  When failure reports are enabled and one is to be generated, always
-##  send one to the address(es) specified here.  If a failure report is
-##  requested by the domain owner, the address(es) are added in a Bcc: field.
-##  If no request is made, they address(es) are used in a To: field.  There
-##  is no default.
-# 
-# FailureReportsBcc postmaster@example.coom
-
-##  FailureReportsOnNone { true | false }
-##  	default "false"
-##
-##  Supplements the "FailureReports" setting by generating reports for
-##  domains that advertise "none" policies.  By default, reports are only
-##  generated (when enabled) for sending domains advertising a "quarantine"
-##  or "reject" policy.
-# 
-# FailureReportsOnNone false
-
-##  FailureReportsSentBy string
-##  	default "USER@HOSTNAME"
-##
-##  Specifies the email address to use in the From: field of failure
-##  reports generated by the filter.  The default is to use the userid of
-##  the user running the filter and the local hostname to construct an
-##  email address.  "postmaster" is used in place of the userid if a name
-##  could not be determined.
-# 
-# FailureReportsSentBy USER@HOSTNAME
-
-##  HistoryFile path
-##  	default (none)
-##
-##  If set, specifies the location of a text file to which records are written
-##  that can be used to generate DMARC aggregate reports.  Records are groups
-##  of rows containing information about a single received message, and
-##  include all relevant information needed to generate a DMARC aggregate
-##  report.  It is expected that this will not be used in its raw form, but
-##  rather periodically imported into a relational database from which the
-##  aggregate reports can be extracted by a tool such as opendmarc-import(8).
-#
-# HistoryFile /var/run/opendmarc.dat
-
-##  IgnoreAuthenticatedClients { true | false }
-##  	default "false"
-##
-##  If set, causes mail from authenticated clients (i.e., those that used
-##  SMTP AUTH) to be ignored by the filter.
-#
-IgnoreAuthenticatedClients true
-
-##  IgnoreHosts path
-##  	default (internal)
-##
-##  Specifies the path to a file that contains a list of hostnames, IP
-##  addresses, and/or CIDR expressions identifying hosts whose SMTP
-##  connections are to be ignored by the filter.  If not specified, defaults
-##  to "127.0.0.1" only.
-#
-# IgnoreHosts /etc/opendmarc/ignore.hosts
-
-##  IgnoreMailFrom domain[,...]
-##  	default (none)
-##
-##  Gives a list of domain names whose mail (based on the From: domain) is to
-##  be ignored by the filter.  The list should be comma-separated.  Matching
-##  against this list is case-insensitive.  The default is an empty list,
-##  meaning no mail is ignored.
-#
-# IgnoreMailFrom example.com
-
-##  MilterDebug (integer)
-##  	default 0
-##
-##  Sets the debug level to be requested from the milter library.
-#
-# MilterDebug 0
-
-##  PidFile path
-##  	default (none)
-##
-##  Specifies the path to a file that should be created at process start
-##  containing the process ID.
-#
-# PidFile /var/run/opendmarc.pid
-
-##  PublicSuffixList path
-##  	default (none)
-##
-##  Specifies the path to a file that contains top-level domains (TLDs) that
-##  will be used to compute the Organizational Domain for a given domain name,
-##  as described in the DMARC specification.  If not provided, the filter will
-##  not be able to determine the Organizational Domain and only the presented
-##  domain will be evaluated.
-#
-# PublicSuffixList path
-
-##  RecordAllMessages { true | false }
-##  	default "false"
-##
-##  If set and "HistoryFile" is in use, all received messages are recorded
-##  to the history file.  If not set (the default), only messages for which
-##  the From: domain published a DMARC record will be recorded in the
-##  history file.
-#
-# RecordAllMessages false
-
-##  RejectFailures { true | false }
-##  	default "false"
-##
-##  If set, messages will be rejected if they fail the DMARC evaluation, or
-##  temp-failed if evaluation could not be completed.  By default, no message
-##  will be rejected or temp-failed regardless of the outcome of the DMARC
-##  evaluation of the message.  Instead, an Authentication-Results header
-##  field will be added.
-#
-# RejectFailures false
-
-##  ReportCommand string
-##  	default "/usr/sbin/sendmail -t"
-##
-##  Indicates the shell command to which failure reports should be passed for
-##  delivery when "FailureReports" is enabled.
-#
-# ReportCommand /usr/sbin/sendmail -t
-
-##  RequiredHeaders { true | false }
-##  	default "false"
-##
-##  If set, the filter will ensure the header of the message conforms to the
-##  basic header field count restrictions laid out in RFC5322, Section 3.6.
-##  Messages failing this test are rejected without further processing.  A
-##  From: field from which no domain name could be extracted will also be
-##  rejected.
-#
-# RequiredHeaders false
-
-##  Socket socketspec
-##  	default (none)
-##
-##  Specifies the socket that should be established by the filter to receive
-##  connections from sendmail(8) in order to provide service.  socketspec is
-##  in one of two forms: local:path, which creates a UNIX domain socket at
-##  the specified path, or inet:port[@host] or inet6:port[@host] which creates
-##  a TCP socket on the specified port for the appropriate protocol family.
-##  If the host is not given as either a hostname or an IP address, the
-##  socket will be listening on all interfaces.  This option is mandatory
-##  either in the configuration file or on the command line.  If an IP
-##  address is used, it must be enclosed in square brackets.
-#
-# Socket inet:8893@localhost
-#Socket unix:/var/spool/opendmarc/opendmarc.sock
-Socket unix:/run/opendmarc/opendmarc.sock
-
-##  SoftwareHeader { true | false }
-##  	default "false"
-##
-##  Causes the filter to add a "DMARC-Filter" header field indicating the
-##  presence of this filter in the path of the message from injection to
-##  delivery.  The product's name, version, and the job ID are included in
-##  the header field's contents.
-#
-# SoftwareHeader false
-
-##  SPFIgnoreResults { true | false }
-##	default "false"
-##
-##  Causes the filter to ignore any SPF results in the header of the
-##  message.  This is useful if you want the filter to perfrom SPF checks
-##  itself, or because you don't trust the arriving header.
-#
-# SPFIgnoreResults false
-
-##  SPFSelfValidate { true | false }
-##	default false
-##
-##  Enable internal spf checking with --with-spf
-##  To use libspf2 instead:  --with-spf --with-spf2-include=path --with-spf2-lib=path
-##
-##  Causes the filter to perform a fallback SPF check itself when
-##  it can find no SPF results in the message header.  If SPFIgnoreResults
-##  is also set, it never looks for SPF results in headers and
-##  always performs the SPF check itself when this is set.
-#
-SPFSelfValidate true
-
-##  Syslog { true | false }
-##  	default "false"
-##
-##  Log via calls to syslog(3) any interesting activity.
-#
-# Syslog false
-
-##  SyslogFacility facility-name
-##  	default "mail"
-##
-##  Log via calls to syslog(3) using the named facility.  The facility names
-##  are the same as the ones allowed in syslog.conf(5).
-#
-# SyslogFacility mail
-
-##  TrustedAuthservIDs string
-##  	default HOSTNAME
-##
-##  Specifies one or more "authserv-id" values to trust as relaying true
-##  upstream DKIM and SPF results.  The default is to use the name of
-##  the MTA processing the message.  To specify a list, separate each entry
-##  with a comma.  The key word "HOSTNAME" will be replaced by the name of
-##  the host running the filter as reported by the gethostname(3) function.
-#
-# TrustedAuthservIDs HOSTNAME
-
-##  UMask mask
-##  	default (none)
-##
-##  Requests a specific permissions mask to be used for file creation.  This
-##  only really applies to creation of the socket when Socket specifies a
-##  UNIX domain socket, and to the HistoryFile and PidFile (if any); temporary
-##  files are normally created by the mkstemp(3) function that enforces a
-##  specific file mode on creation regardless of the process umask.  See
-##  umask(2) for more information.
-#
-# UMask 077
-UMask 002
-
-##  UserID user[:group]
-##  	default (none)
-##
-##  Attempts to become the specified userid before starting operations.
-##  The process will be assigned all of the groups and primary group ID of
-##  the named userid unless an alternate group is specified.
-#
-# UserID opendmarc
-# ATTENTION: user and group are enforced throug the systemd service file