rm useless

7 files changed, 0 insertions, 543 deletions

diff --git a/etc/NetworkManager/NetworkManager.conf b/etc/NetworkManager/NetworkManager.conf
deleted file mode 100644
index 3e7688b3..00000000
--- a/etc/NetworkManager/NetworkManager.conf
+++ /dev/null
@@ -1,4 +0,0 @@
-# Configuration file for NetworkManager.
-# See "man 5 NetworkManager.conf" for details.
-[connection]
-connection.mdns=2
diff --git a/etc/NetworkManager/dispatcher.d/70-wifi-wired-exclusive b/etc/NetworkManager/dispatcher.d/70-wifi-wired-exclusive
deleted file mode 100755
index 79e18eb2..00000000
--- a/etc/NetworkManager/dispatcher.d/70-wifi-wired-exclusive
+++ /dev/null
@@ -1,17 +0,0 @@
-#!/bin/sh
-
-# code modified from:
-# `man nmcli-examples` and Copyright 2012 Johannes Buchner <buchner.johannes@gmx.at> Copyright 2012 - 2014 Red Hat, Inc.
-
-enable_disable_wifi ()
-{
-	if nmcli -t --fields type,state device | grep -q 'ethernet:connected'; then
-		nmcli radio wifi off
-	else
-		nmcli radio wifi on
-	fi
-}
-
-case "$2" in
-	up|down) enable_disable_wifi;;
-esac
diff --git a/etc/NetworkManager/dispatcher.d/90-sbar b/etc/NetworkManager/dispatcher.d/90-sbar
deleted file mode 100755
index c45232da..00000000
--- a/etc/NetworkManager/dispatcher.d/90-sbar
+++ /dev/null
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-case "$2" in
-	up|down) kill -RTMIN+2 $(pidof -x sbar);;
-esac
diff --git a/etc/X11/xorg.conf.d/20-radeon.conf b/etc/X11/xorg.conf.d/20-radeon.conf
deleted file mode 100644
index 3facd79d..00000000
--- a/etc/X11/xorg.conf.d/20-radeon.conf
+++ /dev/null
@@ -1,5 +0,0 @@
-Section "Device"
-	Identifier "Radeon"
-	Driver "radeon"
-	Option "TearFree" "on"
-EndSection
diff --git a/etc/chrony.conf b/etc/chrony.conf
deleted file mode 100644
index 60f37ba5..00000000
--- a/etc/chrony.conf
+++ /dev/null
@@ -1,336 +0,0 @@
-#######################################################################
-#
-# This is an example chrony configuration file.  You should copy it to
-# /etc/chrony.conf after uncommenting and editing the options that you
-# want to enable.  The more obscure options are not included.  Refer
-# to the documentation for these.
-#
-#######################################################################
-### COMMENTS
-# Any of the following lines are comments (you have a choice of
-# comment start character):
-# a comment
-% a comment
-! a comment
-; a comment
-#
-# Below, the '!' form is used for lines that you might want to
-# uncomment and edit to make your own chrony.conf file.
-#
-#######################################################################
-#######################################################################
-### SPECIFY YOUR NTP SERVERS
-# Most computers using chrony will send measurement requests to one or
-# more 'NTP servers'.  You will probably find that your Internet Service
-# Provider or company have one or more NTP servers that you can specify.
-# Failing that, there are a lot of public NTP servers.  There is a list
-# you can access at http://support.ntp.org/bin/view/Servers/WebHome or
-# you can use servers from the pool.ntp.org project.
-
-! server 0.arch.pool.ntp.org iburst
-! server 1.arch.pool.ntp.org iburst
-! server 3.arch.pool.ntp.org iburst
-
-# I don't use auto_offline because: what if wifi connected but has no network? this seems happened a lot to me when modem is up but router is down
-# I don't use offline because: I want to sync the clock sooner
-pool 2.arch.pool.ntp.org iburst
- 
-#######################################################################
-### AVOIDING POTENTIALLY BOGUS CHANGES TO YOUR CLOCK
-#
-# To avoid changes being made to your computer's gain/loss compensation
-# when the measurement history is too erratic, you might want to enable
-# one of the following lines.  The first seems good with servers on the
-# Internet, the second seems OK for a LAN environment.
-
-! maxupdateskew 100
-! maxupdateskew 5
-
-# If you want to increase the minimum number of selectable sources
-# required to update the system clock in order to make the
-# synchronisation more reliable, uncomment (and edit) the following
-# line.
-
-! minsources 2
-
-# If your computer has a good stable clock (e.g. it is not a virtual
-# machine), you might also want to reduce the maximum assumed drift
-# (frequency error) of the clock (the value is specified in ppm).
-
-! maxdrift 100
-
-# By default, chronyd allows synchronisation to an unauthenticated NTP
-# source (i.e. specified without the nts and key options) if it agrees with
-# a majority of authenticated NTP sources, or if no authenticated source is
-# specified.  If you don't want chronyd to ever synchronise to an
-# unauthenticated NTP source, uncomment the first from the following lines.
-# If you don't want to synchronise to an unauthenticated NTP source only
-# when an authenticated source is specified, uncomment the second line.
-# If you want chronyd to ignore authentication in the source selection,
-# uncomment the third line.
-
-! authselectmode require
-! authselectmode prefer
-! authselectmode ignore
-
-#######################################################################
-### FILENAMES ETC
-# Chrony likes to keep information about your computer's clock in files.
-# The 'driftfile' stores the computer's clock gain/loss rate in parts
-# per million.  When chronyd starts, the system clock can be tuned
-# immediately so that it doesn't gain or lose any more time.  You
-# generally want this, so it is uncommented.
-
-driftfile /var/lib/chrony/drift
-
-# If you want to enable NTP authentication with symmetric keys, you will need
-# to uncomment the following line and edit the file to set up the keys.
-
-! keyfile /etc/chrony.keys
-
-# If you specify an NTP server with the nts option to enable authentication
-# with the Network Time Security (NTS) mechanism, or enable server NTS with
-# the ntsservercert and ntsserverkey directives below, the following line will
-# allow the client/server to save the NTS keys and cookies in order to reduce
-# the number of key establishments (NTS-KE sessions).
-
-ntsdumpdir /var/lib/chrony
-
-# If chronyd is configured to act as an NTP server and you want to enable NTS
-# for its clients, you will need a TLS certificate and private key.  Uncomment
-# and edit the following lines to specify the locations of the certificate and
-# key.
-
-! ntsservercert /etc/.../foo.example.net.crt
-! ntsserverkey /etc/.../foo.example.net.key
-
-# chronyd can save the measurement history for the servers to files when
-# it exits.  This is useful in 2 situations:
-#
-# 1. If you stop chronyd and restart it with the '-r' option (e.g. after
-# an upgrade), the old measurements will still be relevant when chronyd
-# is restarted.  This will reduce the time needed to get accurate
-# gain/loss measurements.
-#
-# 2. On Linux, if you use the RTC support and start chronyd with
-# '-r -s' on bootup, measurements from the last boot will still be
-# useful (the real time clock is used to 'flywheel' chronyd between
-# boots).
-#
-# Uncomment the following line to use this.
-
-! dumpdir /var/lib/chrony
-
-# chronyd writes its process ID to a file.  If you try to start a second
-# copy of chronyd, it will detect that the process named in the file is
-# still running and bail out.  If you want to change the path to the PID
-# file, uncomment this line and edit it.  The default path is shown.
-
-! pidfile /var/run/chrony/chronyd.pid
-
-# If the system timezone database is kept up to date and includes the
-# right/UTC timezone, chronyd can use it to determine the current
-# TAI-UTC offset and when will the next leap second occur.
-
-leapsectz right/UTC
-
-#######################################################################
-### INITIAL CLOCK CORRECTION
-# This option is useful to quickly correct the clock on start if it's
-# off by a large amount.  The value '1.0' means that if the error is less
-# than 1 second, it will be gradually removed by speeding up or slowing
-# down your computer's clock until it is correct.  If the error is above
-# 1 second, an immediate time jump will be applied to correct it.  The
-# value '3' means the step is allowed only in the first three updates of
-# the clock.  Some software can get upset if the system clock jumps
-# (especially backwards), so be careful!
-
-makestep 1.0 3
-
-#######################################################################
-### LEAP SECONDS
-# A leap second is an occasional one-second correction of the UTC
-# time scale.  By default, chronyd tells the kernel to insert/delete
-# the leap second, which makes a backward/forward step to correct the
-# clock for it.  As with the makestep directive, this jump can upset
-# some applications.  If you prefer chronyd to make a gradual
-# correction, causing the clock to be off for a longer time, uncomment
-# the following line.
-
-! leapsecmode slew
-
-#######################################################################
-### LOGGING
-# If you want to log information about the time measurements chronyd has
-# gathered, you might want to enable the following lines.  You probably
-# only need this if you really enjoy looking at the logs, you want to
-# produce some graphs of your system's timekeeping performance, or you
-# need help in debugging a problem.
-
-! logdir /var/log/chrony
-! log measurements statistics tracking
-
-# If you have real time clock support enabled (see below), you might want
-# this line instead:
-
-! log measurements statistics tracking rtc
-
-#######################################################################
-### ACTING AS AN NTP SERVER
-# You might want the computer to be an NTP server for other computers.
-#
-# By default, chronyd does not allow any clients to access it.  You need
-# to explicitly enable access using 'allow' and 'deny' directives.
-#
-# e.g. to enable client access from the 192.168.*.* class B subnet,
-
-! allow 192.168/16
-
-# .. but disallow the 192.168.100.* subnet of that,
-
-! deny 192.168.100/24
-
-# You can have as many allow and deny directives as you need.  The order
-# is unimportant.
-
-# If you want to present your computer's time for others to synchronise
-# with, even if you don't seem to be synchronised to any NTP servers
-# yourself, enable the following line.  The value 10 may be varied
-# between 1 and 15.  You should avoid small values because you will look
-# like a real NTP server.  The value 10 means that you appear to be 10
-# NTP 'hops' away from an authoritative source (atomic clock, GPS
-# receiver, radio clock etc).
-
-! local stratum 10
-
-# Normally, chronyd will keep track of how many times each client
-# machine accesses it.  The information can be accessed by the 'clients'
-# command of chronyc.  You can disable this facility by uncommenting the
-# following line.  This will save a bit of memory if you have many
-# clients and it will also disable support for the interleaved mode.
-
-! noclientlog
-
-# The clientlog size is limited to 512KB by default.  If you have many
-# clients, you might want to increase the limit.
-
-! clientloglimit 4194304
-
-# By default, chronyd tries to respond to all valid NTP requests from
-# allowed addresses.  If you want to limit the response rate for NTP
-# clients that are sending requests too frequently, uncomment and edit
-# the following line.
-
-! ratelimit interval 3 burst 8
-
-#######################################################################
-### REPORTING BIG CLOCK CHANGES
-# Perhaps you want to know if chronyd suddenly detects any large error
-# in your computer's clock.  This might indicate a fault or a problem
-# with the server(s) you are using, for example.
-#
-# The next option causes a message to be written to syslog when chronyd
-# has to correct an error above 0.5 seconds (you can use any amount you
-# like).
-
-! logchange 0.5
-
-# The next option will send email to the named person when chronyd has
-# to correct an error above 0.5 seconds.  (If you need to send mail to
-# several people, you need to set up a mailing list or sendmail alias
-# for them and use the address of that.)
-
-! mailonchange wibble@foo.example.net 0.5
-
-#######################################################################
-### COMMAND ACCESS
-# The program chronyc is used to show the current operation of chronyd
-# and to change parts of its configuration whilst it is running.
-
-# By default chronyd binds to the loopback interface.  Uncomment the
-# following lines to allow receiving command packets from remote hosts.
-
-! bindcmdaddress 0.0.0.0
-! bindcmdaddress ::
-
-# Normally, chronyd will only allow connections from chronyc on the same
-# machine as itself.  This is for security.  If you have a subnet
-# 192.168.*.* and you want to be able to use chronyc from any machine on
-# it, you could uncomment the following line.  (Edit this to your own
-# situation.)
-
-! cmdallow 192.168/16
-
-# You can add as many 'cmdallow' and 'cmddeny' lines as you like.  The
-# syntax and meaning is the same as for 'allow' and 'deny', except that
-# 'cmdallow' and 'cmddeny' control access to the chronyd's command port.
-
-# Rate limiting can be enabled also for command packets.  (Note,
-# commands from localhost are never limited.)
-
-! cmdratelimit interval -4 burst 16
-
-#######################################################################
-### HARDWARE TIMESTAMPING
-# On Linux, if the network interface controller and its driver support
-# hardware timestamping, it can significantly improve the accuracy of
-# synchronisation. It can be enabled on specified interfaces only, or it
-# can be enabled on all interfaces that support it.
-
-! hwtimestamp eth0
-! hwtimestamp *
-
-#######################################################################
-### REAL TIME CLOCK
-# chronyd can characterise the system's real-time clock.  This is the
-# clock that keeps running when the power is turned off, so that the
-# machine knows the approximate time when it boots again.  The error at
-# a particular epoch and gain/loss rate can be written to a file and
-# used later by chronyd when it is started with the '-s' option.
-#
-# You need to have 'enhanced RTC support' compiled into your Linux
-# kernel.  (Note, these options apply only to Linux.)
-
-! rtcfile /var/lib/chrony/rtc
-
-# Your RTC can be set to keep Universal Coordinated Time (UTC) or local
-# time.  (Local time means UTC +/- the effect of your timezone.)  If you
-# use UTC, chronyd will function correctly even if the computer is off
-# at the epoch when you enter or leave summer time (aka daylight saving
-# time).  However, if you dual boot your system with Microsoft Windows,
-# that will work better if your RTC maintains local time.  You take your
-# pick!
-
-rtconutc
-
-# By default chronyd assumes that the enhanced RTC device is accessed as
-# /dev/rtc.  If it's accessed somewhere else on your system (e.g. you're
-# using devfs), uncomment and edit the following line.
-
-! rtcdevice /dev/misc/rtc
-
-# Alternatively, if not using the -s option, this directive can be used
-# to enable a mode in which the RTC is periodically set to the system
-# time, with no tracking of its drift.
-
-rtcsync
-
-#######################################################################
-### REAL TIME SCHEDULER
-# This directive tells chronyd to use the real-time FIFO scheduler with the
-# specified priority (which must be between 0 and 100).  This should result
-# in reduced latency.  You don't need it unless you really have a requirement
-# for extreme clock stability.  Works only on Linux.  Note that the "-P"
-# command-line switch will override this.
-
-! sched_priority 1
-
-#######################################################################
-### LOCKING CHRONYD INTO RAM
-# This directive tells chronyd to use the mlockall() syscall to lock itself
-# into RAM so that it will never be paged out.  This should result in reduced
-# latency.  You don't need it unless you really have a requirement
-# for extreme clock stability.  Works only on Linux.  Note that the "-m"
-# command-line switch will also enable this feature.
-
-! lock_all
diff --git a/etc/systemd/resolved.conf b/etc/systemd/resolved.conf
deleted file mode 100644
index c7f6fc5a..00000000
--- a/etc/systemd/resolved.conf
+++ /dev/null
@@ -1,34 +0,0 @@
-#  This file is part of systemd.
-#
-#  systemd is free software; you can redistribute it and/or modify it under the
-#  terms of the GNU Lesser General Public License as published by the Free
-#  Software Foundation; either version 2.1 of the License, or (at your option)
-#  any later version.
-#
-# Entries in this file show the compile time defaults. Local configuration
-# should be created by either modifying this file, or by creating "drop-ins" in
-# the resolved.conf.d/ subdirectory. The latter is generally recommended.
-# Defaults can be restored by simply deleting this file and all drop-ins.
-#
-# Use 'systemd-analyze cat-config systemd/resolved.conf' to display the full config.
-#
-# See resolved.conf(5) for details.
-
-[Resolve]
-# Some examples of DNS servers which may be used for DNS= and FallbackDNS=:
-# Cloudflare: 1.1.1.1#cloudflare-dns.com 1.0.0.1#cloudflare-dns.com 2606:4700:4700::1111#cloudflare-dns.com 2606:4700:4700::1001#cloudflare-dns.com
-# Google:     8.8.8.8#dns.google 8.8.4.4#dns.google 2001:4860:4860::8888#dns.google 2001:4860:4860::8844#dns.google
-# Quad9:      9.9.9.9#dns.quad9.net 149.112.112.112#dns.quad9.net 2620:fe::fe#dns.quad9.net 2620:fe::9#dns.quad9.net
-#DNS=
-#FallbackDNS=9.9.9.9#dns.quad9.net 8.8.8.8#dns.google 2620:fe::9#dns.quad9.net 2001:4860:4860::8888#dns.google
-#Domains=
-#DNSSEC=no
-#DNSOverTLS=no
-MulticastDNS=yes
-#LLMNR=yes
-#Cache=yes
-#CacheFromLocalhost=no
-#DNSStubListener=yes
-#DNSStubListenerExtra=
-#ReadEtcHosts=yes
-#ResolveUnicastSingleLabel=no
diff --git a/etc/wildmidi/wildmidi.cfg b/etc/wildmidi/wildmidi.cfg
deleted file mode 100644
index d0ee73b6..00000000
--- a/etc/wildmidi/wildmidi.cfg
+++ /dev/null
@@ -1,142 +0,0 @@
-# https://github.com/Mindwerks/wildmidi/blob/master/cfg/wildmidi.cfg
-# https://freepats.zenvoid.org/SoundSets/general-midi.html
-#dir /usr/share/midi/freepats
-dir ~/documents/codecs/freepats/
-
-# Automatically generated on Sun Feb 19 19:22:39 EST 2006
-# by http://freepats.opensrc.org/mkcfg.sh.txt
-
-drumset 0
-
- 25	Drum_000/025_Snare_Roll.pat 
- 26	Drum_000/026_Snap.pat 
- 27	Drum_000/027_High_Q.pat 
- 31	Drum_000/031_Sticks.pat 
- 32	Drum_000/032_Square_Click.pat 
- 33	Drum_000/033_Metronome_Click.pat 
- 34	Drum_000/034_Metronome_Bell.pat 
- 35	Drum_000/035_Kick_1.pat amp=100
- 36	Drum_000/036_Kick_2.pat amp=100
- 37	Drum_000/037_Stick_Rim.pat 
- 38	Drum_000/038_Snare_1.pat 
- 39	Drum_000/039_Clap_Hand.pat amp=100
- 40	Drum_000/040_Snare_2.pat 
- 41	Drum_000/041_Tom_Low_2.pat amp=100
- 42	Drum_000/042_Hi-Hat_Closed.pat 
- 43	Drum_000/043_Tom_Low_1.pat amp=100
- 44	Drum_000/044_Hi-Hat_Pedal.pat 
- 45	Drum_000/045_Tom_Mid_2.pat amp=100
- 46	Drum_000/046_Hi-Hat_Open.pat 
- 47	Drum_000/047_Tom_Mid_1.pat amp=100
- 48	Drum_000/048_Tom_High_2.pat amp=100
- 49	Drum_000/049_Cymbal_Crash_1.pat 
- 50	Drum_000/050_Tom_High_1.pat amp=100
- 51	Drum_000/051_Cymbal_Ride_1.pat 
- 52	Drum_000/052_Cymbal_Chinese.pat 
- 53	Drum_000/053_Cymbal_Ride_Bell.pat amp=100
- 54	Drum_000/054_Tombourine.pat 
- 55	Drum_000/055_Cymbal_Splash.pat 
- 56	Drum_000/056_Cow_Bell.pat 
- 57	Drum_000/057_Cymbal_Crash_2.pat 
- 58	Drum_000/058_Vibra-Slap.pat 
- 59	Drum_000/059_Cymbal_Ride_2.pat 
- 60	Drum_000/060_Bongo_High.pat 
- 61	Drum_000/061_Bongo_Low.pat 
- 62	Drum_000/062_Conga_High_1_Mute.pat 
- 63	Drum_000/063_Conga_High_2_Open.pat 
- 64	Drum_000/064_Conga_Low.pat 
- 65	Drum_000/065_Timbale_High.pat 
- 66	Drum_000/066_Timbale_Low.pat 
- 67	Drum_000/067_Agogo_High.pat 
- 68	Drum_000/068_Agogo_Low.pat 
- 69	Drum_000/069_Cabasa.pat amp=100
- 70	Drum_000/070_Maracas.pat 
- 71	Drum_000/071_Whistle_1_High_Short.pat 
- 72	Drum_000/072_Whistle_2_Low_Long.pat 
- 73	Drum_000/073_Guiro_1_Short.pat 
- 74	Drum_000/074_Guiro_2_Long.pat 
- 75	Drum_000/075_Claves.pat amp=100
- 76	Drum_000/076_Wood_Block_1_High.pat 
- 77	Drum_000/077_Wood_Block_2_Low.pat 
- 78	Drum_000/078_Cuica_1_Mute.pat amp=100
- 79	Drum_000/079_Cuica_2_Open.pat amp=100
- 80	Drum_000/080_Triangle_1_Mute.pat 
- 81	Drum_000/081_Triangle_2_Open.pat 
- 82	Drum_000/082_Shaker.pat 
- 84	Drum_000/084_Belltree.pat 
-
-bank 0
-
- 0	Tone_000/000_Acoustic_Grand_Piano.pat amp=120 pan=center
- 1	Tone_000/001_Acoustic_Brite_Piano.pat 
- 2	Tone_000/002_Electric_Grand_Piano.pat 
- 4	Tone_000/004_Electric_Piano_1_Rhodes.pat 
- 5	Tone_000/005_Electric_Piano_2_Chorused_Yamaha_DX.pat 
- 6	Tone_000/006_Harpsichord.pat 
- 7	Tone_000/007_Clavinet.pat 
- 8	Tone_000/008_Celesta.pat 
- 9	Tone_000/009_Glockenspiel.pat 
- 13	Tone_000/013_Xylophone.pat 
- 14	Tone_000/014_Tubular_Bells.pat 
- 15	Tone_000/015_Dulcimer.pat 
- 16	Tone_000/016_Hammond_Organ.pat 
- 19	Tone_000/019_Church_Organ.pat 
- 21	Tone_000/021_Accordion.pat 
- 23	Tone_000/023_Tango_Accordion.pat 
- 24	Tone_000/024_Nylon_Guitar.pat 
- 25	Tone_000/025_Steel_Guitar.pat 
- 26	Tone_000/026_Jazz_Guitar.pat 
- 27	Tone_000/027_Clean_Electric_Guitar.pat 
- 28	Tone_000/028_Muted_Electric_Guitar.pat 
- 29	Tone_000/029_Overdriven_Guitar.pat 
- 30	Tone_000/030_Distortion_Guitar.pat 
- 32	Tone_000/032_Acoustic_Bass.pat 
- 33	Tone_000/033_Finger_Bass.pat 
- 34	Tone_000/034_Pick_Bass.pat 
- 35	Tone_000/035_Fretless_Bass.pat 
- 36	Tone_000/036_Slap_Bass_1.pat 
- 37	Tone_000/037_Slap_Bass_2.pat 
- 38	Tone_000/038_Synth_Bass_1.pat 
- 40	Tone_000/040_Violin.pat 
- 42	Tone_000/042_Cello.pat 
- 44	Tone_000/044_Tremolo_Strings.pat 
- 45	Tone_000/045_Pizzicato_Strings.pat 
- 46	Tone_000/046_Harp.pat 
- 47	Tone_000/047_Timpani.pat 
- 48	Tone_000/048_String_Ensemble_1_Marcato.pat 
- 53	Tone_000/053_Voice_Oohs.pat 
- 56	Tone_000/056_Trumpet.pat 
- 57	Tone_000/057_Trombone.pat 
- 58	Tone_000/058_Tuba.pat 
- 59	Tone_000/059_Muted_Trumpet.pat 
- 60	Tone_000/060_French_Horn.pat 
- 61	Tone_000/061_Brass_Section.pat 
- 64	Tone_000/064_Soprano_Sax.pat 
- 65	Tone_000/065_Alto_Sax.pat 
- 66	Tone_000/066_Tenor_Sax.pat 
- 67	Tone_000/067_Baritone_Sax.pat 
- 68	Tone_000/068_Oboe.pat 
- 69	Tone_000/069_English_Horn.pat 
- 70	Tone_000/070_Bassoon.pat 
- 71	Tone_000/071_Clarinet.pat 
- 72	Tone_000/072_Piccolo.pat 
- 73	Tone_000/073_Flute.pat 
- 74	Tone_000/074_Recorder.pat 
- 75	Tone_000/075_Pan_Flute.pat 
- 76	Tone_000/076_Bottle_Blow.pat 
- 79	Tone_000/079_Ocarina.pat 
- 80	Tone_000/080_Square_Wave.pat 
- 84	Tone_000/084_Charang.pat 
- 88	Tone_000/088_New_Age.pat 
- 94	Tone_000/094_Halo_Pad.pat 
- 95	Tone_000/095_Sweep_Pad.pat 
- 98	Tone_000/098_Crystal.pat 
- 101	Tone_000/101_Goblins--Unicorn.pat 
- 102	Tone_000/102_Echo_Voice.pat 
- 104	Tone_000/104_Sitar.pat 
- 114	Tone_000/114_Steel_Drums.pat 
- 115	Tone_000/115_Wood_Block.pat 
- 120	Tone_000/120_Guitar_Fret_Noise.pat 
- 122	Tone_000/122_Seashore.pat 
- 125	Tone_000/125_Helicopter.pat 
-